MRC 2200/ MRC 2300 Rugged Tablet PC for realtime management!

IPC2U presents the MRC 2200/ MRC 2300 Rugged Tablet PC for logistic management, field applications, hospitality and retail. The MRC 2200 is equipped with a reliable a 8“ 5 wire resistive Touch Screen. The MRC 2200 and MRC 2300 provide a powerful Intel Pineview N450 1.6GHz processor in connection with 1GB DDR2 RAM onboard (up to 2GB). For data storage there is 8GB SSD, which can be upgraded up to 64GB. The Tablet PC offers low power consumption and fast response time. The battery design allows hot swapping, that means that batteries can be exchanged without shutting down the PC. One battery charge lasts for 4- 6 hours.

The MRC 2200 and MRC 2300 can establish fast wireless connection by WLAN 802 b/g/n module. Optionally a GSM/GRPS/HSDPA/WCDMA module can be installed. Furthermore, the MRC 2300 is serially equipped with GPS and Bluetooth module, in the MRC 2200 it can be optionally installed. The MRC 2200 and MRC 2300 can by request be equipped with pre-built-in barcode scanner and RFID module. This allows an automatic read-in of - for example- identification information. The systems can be additionally equipped with 0.3M to 2M webcams.
The MRC 2200 and MRC 2300 are protected with IP54 protection grade as well as military standard MIL-STD-810F, that apply to the whole chassis. Thus the systems are particularly suitable for applications under harsh conditions. The MRC 2200 and MRC 2300 can operate within a wide temperature range from -20°C to  +50°C and can withstand a fall from 1.2m.



Order information
Contact: sales@ipc2U.de or by FON: +49 (0)511 807 259 0

MRC 2200

Features:

• 8" TFT LCD with LED Backlight, 800 x 600 pixels (SVGA) Touch Screen
• Intel Atom N450 1.6GHz, 667MHz FSB
• Intel System Controller Hub ICH8M
• 1GB DDR2 SDRAM- 667MHz onboard, up to 2GB (optional)
• 8GB Solid State Drive/SATA - interface, up to 64GB (optional)
• Intel high definition audio
• 2x 2W built-in speaker
• 1x external mic-in, 1x external line-out, 1x internal mikrophon
• Display autodimmsensor
• 3x USB 2.0 port (1x mini USB connector, 2x USB connector), 1x 2M pixel CMOS camera
• 1x WiFi module (802.11 b/g/n), 1x Class 2 Bluetooth moduel V 2.1 + EDR (optional)
• 1x GPS module (optional), 1x GSM/GPRS/HSDPA/WCDMA mudule (optional)
• 1x RFID module, 13.56MHz, supports  ISO1443A or ISO15693 (optional)
• 1x Barcode Scanner, 1D/2D (optional)